Throttle Control Kit - Twin Engine (BH-400)

Pack Includes: 1 x Aluminum Bellcrank 2 x Nylon Bellcranks nuts, bolts and washers       Details Includes: (1) Aluminum Bellcrank (2) Nylon Bellcranks, nuts, bolts and washers

Bellcrank - C-22 - 3 Line - Upright Shortspan - 2-1/2" Metal - (BB-376)

1 set in Pack. 2-1/2in. Upright. Shortspan. Mounts on the top of bellcrank floor and is used when the engine is in the upright position, allowing you the most direct route to the throttle. When using short span you have quicker "throw" in the...

Bellcrank 4" Nylon with Post - (BB-396)

1 set in Pack. Comes with - 1 Nylon Bellcrank & Bush 3 Brass Eyelets 2 washers 1 Post Note : Requires Soldering  

Bellcrank 3" Nylon with Post - (BB-395)

1 set in Pack. Comes with - 1 Nylon Bellcrank & Bush 3 Brass Eyelets 2 washers 1 Post Note : Requires Soldering  

Bellcrank 2" Nylon with Post - (BB-397)

1 set in Pack. Suitable for smaller/lighter aircraft. Comes with - 1 Nylon Bellcrank & Bush 3 Brass Eyelets 2 washers 1 Post The 2in bellcrank can provide the pilot with greater sensitivity, depending on the handle and control horn...

Bellcrank - C-21 - 3 Line - Upright Longspan - 3-1/2" Metal - (BB-375)

1 set in Pack.  3-1/2in. Upright. Longspan. Mounts on the top of bellcrank floor and is used when the engine is in the upright position, allowing you the most direct route to the throttle. When using long span you have less "throw" in the...

Bellcrank 1-7/8" Metal - 1/2A - (P-233)

1 set in pack. 1&7/8 long. Aluminium. All metal bellcrank with mounting hardware.   Good for use on 1/2a aircraft - .049 to .09

Bellcrank 3-3/8" Metal - (P-223)

1 set in pack. 3-3/8in long.  Aluminium. All metal bellcrank with mounting hardware.

Bellcrank 2-5/16" Metal - (P-222)

1 set in pack. 2&5/16 long.  Aluminium. All metal bellcrank with mounting hardware.

Bellcrank 4" Nylon - (BB-389)

1 set in Pack. Suitable for larger aircraft. Comes with - Bolt - Washers - Nut - Post – Bellcrank. Can be fitted inside the fuselage or on or in a wing.  The 4in bellcrank can provide the pilot with less sensitivity, depending on the...

Bellcrank Nylon 1/2A - (BB-390)

1 set in Pack. Suitable for small, light aircraft.  Comes with - Bolt - Washers - Nut - Post – Bellcrank - mini Control Horn. Use this bellcrank only with aircraft powered by .049 or .07 engines.

Bellcrank 3" Nylon - (BB-388)

1 set in Pack. Suitable for average size aircraft. Comes with - Bolt - Washers - Nut - Post – Bellcrank. Can be fitted inside the fuselage or on or in a wing. The 3in bellcrank can provide the pilot with average sensitivity, depending on the...