4 Way Socket Wrench - Plug Spanner - (DU-701)

1 peice. Perfect for Glow Plugs & Prop Nuts. Sizes – 8mm (5/16”) - 9.5mm (3/8”) - 11mm (7/16”) - 13mm (1/2”).

Axle Shafts - 1/8in x 1-1/4in- Spring Steel - (DU-246)

Zinc plated spring steel construction. Bolts to any Dural landing gear with a 1/4" hole. Pack Contains - 2 x Shafts -  Length: 1.25"  .325 (Thread) 1.7" (Total Length) Diameter: 1/8"...

Control Horn - Nylon 'T'-Style - (DU-237)

2 sets in pack. Comes with bolts and mounting plates. Suitable for most Control Line aircraft. Heavy duty mount and horn with 5 adjusting holes.

Exhaust Deflector - For engine sizes .20 to .34 ci. (3.2cc to 5.5cc ) (DU-696)

For engine sizes .20 to .34 c.i. (3.2 cc to 5.5cc) 1 in pack. Convenient 45o Degree angle helps keep your plane free from oily residue. Made from heat resistant silicone. Comes with 2 cable...

Fuel Line - Super Blue Silicone - (Medium) - (DU-222)

1 x 600mm (approx 2ft) length in pack. Thicker wall for extra strength Outside diameter approx - 5mm Inside diameter approx - 2.2mm Use on tanks with 3.2mm (1/8")

Fuel Line Clips - (DU-677)

4 in pack. Suitable for use with tanks with 1/8” OD. outlet pipes (Standard size) and most engines and fittings. Not suitable for tanks with small outlet pipes or small engines such as...

Hinge Slotter Kit - (DU-660)

Takes the hassle out of slotting control surfaces for gluing hinges. Designed to work with all Dubro hinges. The 3 slotters and the picker are permanently mounted to red nylon handles...

Shaft Extension (BH-985)

Prop Shaft Extension - 1/4-28 to 1/4-28 Thread x 1/2" long 1 set in pack. Fits all 1/4-28 shafts including the Brodak .25 and .40 engines Threaded all the way through.

Steel Landing Gear Straps (DU-158)

Steel Landing Gear Straps. Pack Contains - 4 x Straps 8 * Wood Screws. For an even stronger solution replace the screws with M2 bolts and fasten from one side to the other. Can be drilled to...

Nickel Plated T Pins (100 Pack) - (DU-252)

100 in pack. Strong,  Smooth and Sharp. Each pin is Nickel Plated,  1 inch long (approx 25mm) and has a 'T' shaped head for easier and more accurate use.

Tack Cloth (BH-923)

1 piece in pack -  approx 457mm x 915mm (18" by 36").  A sticky soft cotton cloth used to wipe away sanding dust before painting.  Will clean wood, metal, or plastic surface...

Spinner - 38mm (1-1/2in) Black - (DU-261)

1 in pack. 2 Blade. 38mm (1-1/2in)  Black