Wire - Landing Gear Wire - 3/32" (2.4mm * 450mm) - (MW5-S)

Wire for Landing Gear or also suitable as a medium weight control rod wire Pack Contains 2 pieces - Each piece is -    2.4mm (3/32") dia approx  x no less than 450mm (18") approx long

Wire - Landing Gear Wire - 1/8" (3.2mm * 450mm) - (MW6-S)

Wire for Landing Gear or can also be used for a heavier weight control rod wire Pack Contains 2 pieces - Each piece is -    3.2mm (1/8") dia approx  x no less than 450mm (18") approx long

Steel Landing Gear Straps (DU-158)

Steel Landing Gear Straps. Pack Contains - 4 x Straps 8 * Wood Screws. For an even stronger solution replace the screws with M2 bolts and fasten from one side to the other. Can be drilled to M3 size.  

Landing Gear Clip - Nylon - Bolt Through - 2.4mm (3/32) - (BH-702)

4 in pack. Comes with - 4 x Nylon landing gear saddles for 2.4mm (3/32in) landing gear wire. 4 Bolts & 4 Nuts . Each bolt is approx 2mm diameter and 24mm long (2-56 *1 in) These saddles are a very strong method of fitting landing gear wire...

Landing Gear Clip - Nylon - Bolt Through - 3.2mm (1/8) - (BH-701)

4 in pack. Comes with - 4 x Nylon landing gear saddles for 3.2mm (1/8”) landing gear wire. 4 Bolts & 4 Nuts . Each bolt is approx 2mm diameter and 24mm long (2-56 *1 in) These saddles are a very strong method of fitting landing gear...

38 Special - Landing Gear - Profile - (BG-1722)

2 landing legs in pack. This landing gear is meant to be used with profile aircraft and is made from hardened Aluminium alloy. Very strong and  suitable for most aircraft from engine size .15 (2.5cc) and up.   Ideally mounted in front of...

Landing Gear Clip - Nylon - 2.4mm (3/32) - (BH-698)

4 in pack. Comes with 4 x Nylon landing gear sadles for 2.4mm (3/32”) landing gear wire and 8 x wood screws. These sadles are a very strong method of fitting landing gear wire to an aircraft. They can be easily removed for maintenance. For...

Landing Gear Clip - Nylon - 3.2mm (1/8) - (BH-699)

4 in pack. Comes with 4 x Nylon landing gear sadles for 3.2mm (1/8”) landing gear wire and 8 x wood screws. These sadles are a very strong method of fitting landing gear wire to an aircraft. They can be easily removed for maintenance. For a...

Shoestring - Landing Gear - Profile - (BG-1764)

2 landing legs in pack. This landing gear is meant to be used with profile aircraft and is made from hardened Aluminium alloy. Very strong and  suitable for most aircraft from engine size .15 (2.5cc) and up.   Ideally mounted in front of...

Vector 40 - Landing Gear - 1 Piece - (BG-1748)

1 x 1 piece gear in pack. This landing gear is meant to be used with full fuselage aircraft and is made from hardened Aluminium alloy. It is designed to bolt to the underside of the Fuselage.   Note: Width across the span = approx 245mm...