Leadout Wire Kit - 3 Line - (0.27) - (BH-600)

1 set in pack.        Used for setting up a 3 Line throttle system.  (See also BCH-370 & BCH-371) Comes with 1 x length of .027 wire approx 3000mm (10ft) Long. 3 Brass Thimbles 6 Copper Crimps 3 Eyelets Leadouts...

Thimbles (Medium) - (BH-320)

6 in a pack. Approximately 6mm outside diameter and 3mm inside. Thimbles are a great way to make tidy end loops on your flying lines. In some cases they can also be used as leadout guides or to re-enforce holes through the fuselage formers to take...

Brass Eyelets - 1/8 I.D. - (SH-215)

Brass Eyelets 3 in a Pack. Each eyelet has a flanged opening at one end Approx 3.2mm (1/8 inch) inside diameter Approx 15 mm long.

Brass Eyelets - 3/32 I.D. - (SH-214)

Brass Eyelets 10 in a Pack. Each eyelet has a flanged opening at one end Approx 2.4mm (3/32 inch) inside diameter Approx 8 mm long.

Brass Eyelets - 1/16 I.D. - (SH-213)

Brass Eyelets 15 in a Pack. Each eyelet has a flanged opening at one end Approx 1.6mm (1/16 inch) inside diameter Approx 10 mm long.

Brass Eyelets - 1/32 I.D. - (SH-212)

Brass Eyelets 15 in a Pack. Each eyelet has a flanged opening at one end 0.8 mm (1/32 inch) inside diameter Approx 5 mm long.

Leadout Guide - Non-Independent - 3 Line Adjustable - (BH-762)

1 piece set. 1 guide block for 3 lines (adjust all 3 lines in one movement) 1 x 3mm thick plywood mount. 1 x Nylon line guide block. Size -114mm L * 12mm H. Fits to the tip of the left hand wing.

Leadout Eyelets - 1/2A - (BH-608)

4 in a Pack. Each eyelet has a flanged opening at one end 1.6 mm (1/16 inch) inside diameter 2.4 mm (3/32 inch) outside diameter 11 mm (7/16 inch) long. Fit to wing tips to correctly position the leadouts coming from the bellcrank. Suitable for...

Leadout Guide - Dual - 2 Line Adjustable - (BH-760)

1 piece set. Adjustable Nylon line guide. 1 guide for 2 lines (Dual) in one 3mm plywood mount. Size -114mm L * 12mm H. Fits to the tip of the left hand wing.

Control Rod Retainer - 3/32" (2.4mm) Wire - (BH-722)

2 in pack. To suit 3/32" (2.4mm) Wire. Suitable for pushrods which use a 90 degree bend through the mounting hole. Stops the Pushrod from falling out of its mounting hole. Can be fitted to both the 'Bellcrank to Pushrod' connection and the...

Control Rod Retainer - 5/64" (2.0mm) Wire - (BH-721)

2 in pack. To suit 5/64" (2.0mm) Wire. Suitable for pushrods which use a 90 degree bend through the mounting hole. Stops the Pushrod from falling out of its mounting hole. Can be fitted to both the 'Bellcrank to Pushrod' connection and the...

Control Rod Retainer - 1/16" (1.6mm) Wire - (BH-720)

2 in pack. To suit 1/6" (1.6mm) Wire. Suitable for pushrods which use a 90 degree bend through the mounting hole. Stops the Pushrod from falling out of its mounting hole. Can be fitted to both the 'Bellcrank to Pushrod' connection and the 'Pustrod...