Handle - Poplar - Large - without finger grips - (RE-425)

1 piece. Poplar (Large) wooden handle with aluminium tubing through the handle to take the thrust. The wood is not load bearing. Cable : .046" 7 * 7 strand Stainless Steel - 120Kb (270lb)...

Handle - Control Line - Wood - (C-1)(BH-360)

1 piece. Features shaped wood without finger grips that fits comfortably into the palm your hand. It has slotted Aluminium front sliders that are both durable and lightweight. Includes a wrist...

Propeller (Wood) - BY&O - 8 x 5 - (BH-1527)

1 Piece. Wooden Propeller. Diameter = 8 inches. Pitch = 5 inches. Hole for Prop shaft - approx 1/4in (6.4mm)

Propeller (Wood) - BY&O - 8 x 6 - (BH-1528)

1 Piece. Wooden Propeller. Diameter = 8 inches. Pitch = 6 inches. Hole for Prop shaft - approx 1/4in (6.4mm)

Fuel Tank - Cox Surestart (mini) -

Used. 1 in pack. Mini fuel tank for use with Cox Surestart engines. The tank plugs onto the fuel nipple under the engine backplate where the fuel hose would nornally be fitted.

Handle - Control Line - (BH-359)

1 in pack. This is a light duty handle which is only meant for use with planes powered by .049 to .07 size engines.

Propeller (Wood) - BY&O - 9 x 4 - (BH-1532)

1 Piece. Wooden Propeller. Diameter = 9 inches. Pitch = 4 inches. Hole for Prop shaft - approx 1/4in (6.4mm)

Propeller (Wood) - BY&O - 9 x 5 - (BH-1533)

1 Piece. Wooden Propeller. Diameter = 9 inches. Pitch = 5 inches. Hole for Prop shaft - approx 1/4in (6.4mm)

Propeller (Wood) - BY&O - 9 x 6 - (BH-1534)

1 Piece. Wooden Propeller. Diameter = 9 inches. Pitch = 6 inches. Hole for Prop shaft - approx 1/4in (6.4mm)

J Bolts - (BH-301)

4 each in pack. Can be used to hold Fuel Tank retainers or to hold Wire Landing Gear in place. 15mm (5/8") reach through the fuselage 5mm reach between the 'J' 4-40 'J' bolts x 4 Flat Washers...

Maple Engine Mount - 2 pieces (3/8" x 3/8" by approx 8-3/4" each)

Engine Mounting Bearer.  9.5mm x 9.5mm or approx (3/8" x 3/8") Standard Bearer. 2 Pieces - each measuring at least 225mm long or  approx (8-3/4") at least. Cut from dense hard maple,...

Maple Engine Mount - (Heavy Duty Bearer) - 2 pieces (1/2" x 3/8" by approx 8-3/4" each)

Engine Mounting Bearer.  12.7mm x 9.5mm or approx (1/2" x 3/8") Heavy Duty. 2 Pieces - each measuring at least 225mm long or approx (8-3/4") at least. Cut from dense hard maple, strongest...