Junior Ring Master

  2 sheets pre-laser-cut ribs specifically designed for building or repairing a model Junior Ringmaster a smaller version of the iconic Ringmaster control line model. The Junior Ringmaster is a classic model airplane favored by beginners and...

Cardinal Rib Set

  4 sheets pre-laser-cut ribs specifically designed for building or repairing a model Cardinal plan a popular control line stunt model. The Cardinal is recognized for its performance in aerobatic flight and is a favorite among control line...

Oriental Rib Set (built up)

  6 sheets pre-laser-cut ribs specifically designed for building or repairing a model airplane for the 'built up' Oriental model. Built up refers to a set of pre-cut balsa ribs designed for constructing or repairing the wings of the Oriental. The...

Nobler Rib Set

  6 sheets pre-laser-cut ribs specifically designed for building or repairing a model airplane from the Nobler series. The Nobler is a famous control line stunt model airplane originally designed by George Aldrich in the 1950s. It is highly regarded...

Wood craft glue (PVA)

Clear glue for balsa flying projects and canopies. •NON-TOXIC•DRIES CLEAR•FAST SETTING•WATER BASED•NON-STAINING

Wood Epoxy Putty - instant bond

Sculpts easily to reshape and fills cracks and gouges SETS IN 15-25 MINUTES - HARD IN 60 SECONDS• INTERIOR AND EXTERIOR USE• PUTTY-LIKE CONSISTENCY ELIMINATES DRIPS AND RUNS• WILL NOT SHRINK OR PULL AWAY• DRILL, SAW, SAND, FILE,...

Brush on Electrical tape (Black) - 118ml

Brush on electrical tape seals out moisture and corrosion in those hard to reach places.

Nickel Plated T Pins (100 Pack) - (DU-252)

100 in pack. Strong,  Smooth and Sharp. Each pin is Nickel Plated,  1 inch long (approx 25mm) and has a 'T' shaped head for easier and more accurate use.

Adjustable Push Rod Guide

A critical cmponent in control models to ensure precise control of the elevator or other items. It prevents the pushrod from bowing under compression during manouvers maintaining consistent control.

Tack Cloth (BH-923)

1 piece in pack -  approx 457mm x 915mm (18" by 36").  A sticky soft cotton cloth used to wipe away sanding dust before painting.  Will clean wood, metal, or plastic surface. Won't harden or dry out.  

Maple Engine Mount - (Heavy Duty Bearer) - 2 pieces (1/2" x 3/8" by approx 8-3/4" each)

Engine Mounting Bearer.  12.7mm x 9.5mm or approx (1/2" x 3/8") Heavy Duty. 2 Pieces - each measuring at least 225mm long or approx (8-3/4") at least. Cut from dense hard maple, strongest wood for its weight available. Resists splitting on...

Maple Engine Mount - 2 pieces (3/8" x 3/8" by approx 8-3/4" each)

Engine Mounting Bearer.  9.5mm x 9.5mm or approx (3/8" x 3/8") Standard Bearer. 2 Pieces - each measuring at least 225mm long or  approx (8-3/4") at least. Cut from dense hard maple, strongest wood for its weight available. Resists...