Engine Mounting Bolts - 4-40 X 1-1/2" (38mm) - Lock Nuts

Engine Mounting Bolt set with Lock Nuts Pack of 4. 4-40 x 1-1/2" bolts (approx 38mm) Head Type - Straight Screwdriver slot Bolts x 4 Flat Washers x 4 Lock Nuts x 4    

Engine Mounting Bolts - 4-40 X 1-1/2" (38mm) - T Nuts

Engine Mounting Bolt set with Tee (Blind) Nuts Pack of 4. 4-40 x 1-1/2" bolts (approx 38mm) Head Type - Straight Screwdriver slot Bolts x 4 Flat Washers x 4 Spring Washers x 4 Tee (Blind) Nuts x 4    

Nylon Engine Mount - For .20 to .25 glow engines - (DAV-2025)

1 set in pack Contains - 1 x Glass Filled Nylon Motor Mount 4 x Screws for engine mounting.   When you install a Dave Brown glass filled engine mount, your model will be lighter, and your engine will have a much better chance of surviving...

Shaft Extension (BH-985)

Prop Shaft Extension - 1/4-28 to 1/4-28 Thread x 1/2" long 1 set in pack. Fits all 1/4-28 shafts including the Brodak .25 and .40 engines Threaded all the way through.

Steel Axle Bolts - 6-32 X 1-1/2" (38mm) - (BH-703)

Pack contains - 2 x Bolts - 6-32 x 1-12" 2 x 6-32 Hex Nuts 2 x 6-32 Lock Nuts 2 x #6 Spring Washers

Engine Mounting Bolts - 4-40 X 1" (25mm) - T Nuts

Engine Mounting Bolt set with Tee (Blind) Nuts  (Counter Sunk) Pack of 4. 4-40 x 1" bolts (approx 25mm) Head Type - Straight Screwdriver slot Bolts x 4 Flat Washers x 4 Spring Washers x 4 Blind Nuts or (Tee Nuts) x 4

Beam Motor Mount - .049 - 1/2A - (BH-794)

1 set in pack. Contains - 2 x Beams Mounting Hardware This mount can be used to convert your radial mount .049 powered aircraft to take an .049 beam mount engine such as the Brodak (BE-1364) It can bolt to the front of the (BH-801) radial...

Engine Test Stand - 049 to .15 (.8cc to 2.5cc) - (BH-1250)

This Test Stand is used for breaking in engines on the workbench. Features - Made of Cast Aluminium An adjustable aluminium support base which may be bolted on to a workbench or table Can be used for Brodak .049 engines and up. Will take a OS...

Engine Mounting Bolts - 4-40 X 1-1/4 (32mm) - T Nuts

Engine Mounting Bolt set with Tee (Blind) Nuts Pack of 4. 4-40 x 1-1/4" bolts (approx 32mm) Head Type - Straight Screwdriver slot Bolts x 4 Flat Washers x 4 Spring Washers x 4 Blind Nuts or (Tee Nuts) x 4  

Needle - to suit Brodak .25ci (4cc) & .40ci (6.5cc) Glow Engine - (BH-1361)

1 in pack. To suit Brodak .25ci (4cc) & .40ci (6.5cc) Glow Engine.

Needle Valve Assembly - Brodak - to Suit .25 to .40 Engines - (BH-1356)

1 set in pack. To suit Brodak engines from .25ci to .40ci 1 x Spray Bar Assembly 1 x Needle valve.