Bellcrank 2" Nylon - (BB-387)

1 set in Pack. Suitable for smaller/lighter aircraft. Comes with - Bolt - Washers - Nut - Post - Bellcrank. Can be fitted inside the fuselage, or on, or inside a wing.  The 2in bellcrank can...

Bellcrank 2" Nylon with Post - (BB-397)

1 set in Pack. Suitable for smaller/lighter aircraft. Comes with - 1 Nylon Bellcrank & Bush 3 Brass Eyelets 2 washers 1 Post The 2in bellcrank can provide the pilot with greater...

Bellcrank 3" Nylon - (BB-388)

1 set in Pack. Suitable for average size aircraft. Comes with - Bolt - Washers - Nut - Post – Bellcrank. Can be fitted inside the fuselage or on or in a wing. The 3in bellcrank can...

Bellcrank 3" Nylon with Post - (BB-395)

1 set in Pack. Comes with - 1 Nylon Bellcrank & Bush 3 Brass Eyelets 2 washers 1 Post Note : Requires Soldering  

Bellcrank 4" Nylon - (BB-389)

1 set in Pack. Suitable for larger aircraft. Comes with - Bolt - Washers - Nut - Post – Bellcrank. Can be fitted inside the fuselage or on or in a wing.  The 4in bellcrank can provide...

Bellcrank 4" Nylon with Post - (BB-396)

1 set in Pack. Comes with - 1 Nylon Bellcrank & Bush 3 Brass Eyelets 2 washers 1 Post Note : Requires Soldering  

Bellcrank Nylon 1/2A - (BB-390)

1 set in Pack. Suitable for small, light aircraft.  Comes with - Bolt - Washers - Nut - Post – Bellcrank - mini Control Horn. Use this bellcrank only with aircraft powered by .049 or ...

Brass Eyelets - 1/16 I.D. - (SH-213)

Brass Eyelets 15 in a Pack. Each eyelet has a flanged opening at one end Approx 1.6mm (1/16 inch) inside diameter Approx 10 mm long.

Brass Eyelets - 1/32 I.D. - (SH-212)

Brass Eyelets 15 in a Pack. Each eyelet has a flanged opening at one end 0.8 mm (1/32 inch) inside diameter Approx 5 mm long.

Brass Eyelets - 1/8 I.D. - (SH-215)

Brass Eyelets 3 in a Pack. Each eyelet has a flanged opening at one end Approx 3.2mm (1/8 inch) inside diameter Approx 15 mm long.

Brass Eyelets - 3/32 I.D. - (SH-214)

Brass Eyelets 10 in a Pack. Each eyelet has a flanged opening at one end Approx 2.4mm (3/32 inch) inside diameter Approx 8 mm long.

Control Horn - No Offset (Center) - (BH-753)

1 in pack. 2.4mm (3/32”) Wire - 100mm (4”) reach - 3 hole Control Horn. Suitable for use when the pushrod exits the center of the fuselage. Can be used for both Flaps and...