Landing Gear Clip - Nylon - 2.4mm (3/32) - (BH-698)

4 in pack. Comes with 4 x Nylon landing gear sadles for 2.4mm (3/32”) landing gear wire and 8 x wood screws. These sadles are a very strong method of fitting landing gear wire to an...

Landing Gear Clip - Nylon - 3.2mm (1/8) - (BH-699)

4 in pack. Comes with 4 x Nylon landing gear sadles for 3.2mm (1/8”) landing gear wire and 8 x wood screws. These sadles are a very strong method of fitting landing gear wire to an...

Landing Gear Clip - Nylon - Bolt Through - 2.4mm (3/32) - (BH-702)

4 in pack. Comes with - 4 x Nylon landing gear saddles for 2.4mm (3/32in) landing gear wire. 4 Bolts & 4 Nuts . Each bolt is approx 2mm diameter and 24mm long (2-56 *1 in) These...

Landing Gear Clip - Nylon - Bolt Through - 3.2mm (1/8) - (BH-701)

4 in pack. Comes with - 4 x Nylon landing gear saddles for 3.2mm (1/8”) landing gear wire. 4 Bolts & 4 Nuts . Each bolt is approx 2mm diameter and 24mm long (2-56 *1 in) These...

Leadout Eyelets - 1/2A - (BH-608)

4 in a Pack. Each eyelet has a flanged opening at one end 1.6 mm (1/16 inch) inside diameter 2.4 mm (3/32 inch) outside diameter 11 mm (7/16 inch) long. Fit to wing tips to correctly position...

Leadout Guide - Dual - 2 Line Adjustable - (BH-760)

1 piece set. Adjustable Nylon line guide. 1 guide for 2 lines (Dual) in one 3mm plywood mount. Size -114mm L * 12mm H. Fits to the tip of the left hand wing.

Leadout Guide - Independent - 2 Line Adjustable - (BH-761)

1 piece in set. Independently adjustable Nylon line guides. 2 guides in one 3mm plywood mount. Size -114mm L * 12mm H. Fits to the tip of the left hand wing.

Leadout Guide - Non-Independent - 3 Line Adjustable - (BH-762)

1 piece set. 1 guide block for 3 lines (adjust all 3 lines in one movement) 1 x 3mm thick plywood mount. 1 x Nylon line guide block. Size -114mm L * 12mm H. Fits to the tip of the left hand...

Leadout Wire Kit (0.27) - (BH-601)

1 set in pack. Comes with 1 x length of .027 wire approx 2100mm (7ft) Long. 2 x Brass Thimbles 4 x Copper Crimps 2 x Eyelets Leadouts are attached to the bellcrank and 'lead out' on or...

Leadout Wire Kit - 3 Line - (0.27) - (BH-600)

1 set in pack.        Used for setting up a 3 Line throttle system.  (See also BCH-370 & BCH-371) Comes with 1 x length of .027 wire approx 3000mm (10ft) Long. 3...

Leadout Wire Kit 1/2A - (BH-602)

1 set in pack. Comes with .018 line by 4ft – 2 brass eyelets – 4 copper crimps – 2 leadout eyelets. Leadouts are attached to the bellcrank and 'lead out' on or through the wing...

Lil Jumpin Bean - (049) - CLP-73

Brodak have produced this 1/2 A Carl Goldberg model. It's built-up wing combined with a simple 'profile' fuselage for an easy build to deliver top stunt performances with only a .049 engine. It is a...